Sansui Solid State 3500 Receiver
Sansui Solid State 3500 ReceiverSansui Solid State 3500 ReceiverSansui Solid State 3500 ReceiverSansui Solid State 3500 ReceiverSansui Solid State 3500 ReceiverSansui Solid State 3500 ReceiverSansui Solid State 3500 ReceiverSansui Solid State 3500 ReceiverSansui Solid State 3500 ReceiverSansui Solid State 3500 ReceiverSansui Solid State 3500 ReceiverSansui Solid State 3500 ReceiverSansui Solid State 3500 Receiver

745.00

Sansui Solid State 3500 Receiver. Fully revitalized.
Classic Vintage.  Collector’s model
The device has been completely checked and serviced.
TURN THE VOLUME POTENTIOMETERS DOWN BEFORE TURNING THE AMPLIFIER OFF!
In our projects we do not use veneers that are thin, unreliable and, above all, not resistant to damage!
We use only the highest quality veneers,  i.e. wood sheets of 3-5mm thickness. Thanks to this solution and the bonding technology we have developed, our products are equipped with durable and beautiful enclosures.

Description

Sansui Solid State 3500 Receiver. Fully revitalized. Classic Vintage

 

Sansui Electric Co., Ltd. was founded in 1947 as a manufacturer of transformers, but already in the 1960s it gained a reputation as a serious producer of audio components. Despite its huge popularity (especially in the United States) in the 60s and 70s, after 1985 the company began to bring much less profits than its rivals (Sony, Pioneer or Technics). It was the end of the heyday of hi-end equipment, which was related to an increase in sales of personal computers. At that time, Sansui Electric Co., Ltd. focused on the production of high-end components in Japan, and also started to produce high quality TV sets and other video equipment, while stopping exports. At the end of the 90s, the brand name was used on video devices manufactured by other companies.

Eventually, Sansui Electric Co., Ltd. as part of Grande Holdings went bankrupt in 2014. It is worth noting that Sansui was the first company to use transformers in audio equipment, and first to introduce to the market a high-voltage tube-transistor (hybrid) amplifier and a QS / RM system (Quadrasonic System / Regular Matrix), which allowed to obtain four-channel sound from two-channel one.

Sansui products already in the 60s were world-famous for their great quality of sound engineering, great design and the highest performance. This was possible mainly because each model was created from start to finish by Sansui experts. Only the best parts were used in production to ensure uniform and highest quality, and each device was repeatedly checked with the most accurate measuring instruments before it reached the customer. Thanks to this approach, Sansui Solid State receivers were characterized by low interference parameters, higher damping factors, greater dynamics, and above all, much better sensitivity and selectivity.

Solid State 3500 is a Class A model which will impress you with its beautiful, warm sound and unusually rich music scene, letting you enjoy every little detail.

The new wooden enclosure has been revitalized from scratch basing on the original designs from the 70s. Teak wood was used and the upper element was CNC milled. The wood finish is Chinese oil produced from natural oils. Potentiometers in perfect condition. The device has been completely reviewed and serviced.

New amber lighting illuminates the front panel.

Collector’s item. In perfect condition.

 

Technical characteristics:

–  class A model
– power : 2 x 39W at 8 Ohm, stereo
– tuning range FM 88-108 MHz, does not require reprogramming
– impedance: 8 Ohm – 16 Ohm
– frequency response – 20Hz – 20 000Hz
– total harmonic distortion: 0.8%
– input sensitivity: 2mV (MM), 150mV (DIN), 150mV (line)
– output: 200mV (line), 200mV (DIN)
– signal to noise ratio: 65dB (MM), 70dB (DIN), 70dB (line)
– weight: 18 kg
– damping factor: 50
– dimensions: 47cm x 17cm x 33cm (W x H x D)
– produced in 1969
– produced in Japan

Additional information

Weight 15 kg
Dimensions 50 x 40 x 30 cm